FREE PDF QUIZ 2025 NUTANIX ACCURATE NCS-CORE: LATEST NUTANIX CERTIFIED SERVICES CORE INFRASTRUCTURE PROFESSIONAL BRAINDUMPS FILES

Free PDF Quiz 2025 Nutanix Accurate NCS-Core: Latest Nutanix Certified Services Core Infrastructure Professional Braindumps Files

Free PDF Quiz 2025 Nutanix Accurate NCS-Core: Latest Nutanix Certified Services Core Infrastructure Professional Braindumps Files

Blog Article

Tags: Latest NCS-Core Braindumps Files, New NCS-Core Test Objectives, NCS-Core Authorized Certification, Valid Dumps NCS-Core Ebook, Test NCS-Core Questions

P.S. Free & New NCS-Core dumps are available on Google Drive shared by TorrentVCE: https://drive.google.com/open?id=1YW7TtUZ0PUqdDZltb0zWX3D7QKx7laLQ

Practicing with Nutanix NCS-Core Exam questions will help you to become an expert in and acquire the Nutanix NCS-Core. Nutanix NCS-Core Exam Questions allow you to verify your skills as a professional. You have to pass the Nutanix NCS-Core to achieve the associate-level certification.

The NCS-Core Certification Exam is a vendor-neutral certification that is recognized by leading IT organizations globally. Nutanix Certified Services Core Infrastructure Professional certification is designed to help IT professionals enhance their skills and knowledge in core infrastructure solutions and stay up to date with the latest advancements in technology. Nutanix Certified Services Core Infrastructure Professional certification is also a valuable asset for organizations looking to hire IT professionals with expertise in managing and deploying Nutanix infrastructure solutions.

>> Latest NCS-Core Braindumps Files <<

Nutanix NCS-Core Exam Prep Material Are Available In Multiple Formats​

Our test engine has been introduced for the preparation of NCS-Core practice test and bring great convenience for most IT workers. It will make you feel the atmosphere of the NCS-Core actual test and remark the mistakes when you practice the exam questions. We strongly recommend that you should prepare your NCS-Core Exam PDF with our test engine before taking real exam.

Nutanix Certified Services Core Infrastructure Professional Sample Questions (Q100-Q105):

NEW QUESTION # 100
Refer to the exhibit.

The customer has an existing NX-3160 block and is adding a second node into it.
Where should the node be installed?"

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

Explanation:
Based on the exhibit which shows an NX-3160 block with marked slots, the correct slot for installing a new node in the existing NX-3160 block is slot 2. This configuration is typically aligned with the chassis' design for orderly expansion and maintaining balanced power and cooling distribution among the nodes.References:
Nutanix Bible, Nutanix University NCS-Core 6.8 learning materials


NEW QUESTION # 101
A customer has provided the following network requirements to their consultant during a discovery session for AHV cluster deployments:
*Maximum Uptime Guest Traffic is a Hard Requirement
*Maximum Throughput for Guest is a Hard Requirement
*Link Aggregation is established at the TORs
Cluster nodes have the following network card configurations:
*2 x 40GbE Adapters
*2 x IGbE Adapters
How should the consultant satisfy these requirements?

  • A. Bonded 2 x 40GbE Adapters with LACP Disabled for Storage Traffic and Guest Traffic using balance-sib
  • B. Bonded 2 x 40GbE Adapters with LACP Disabled for Storage Traffic and bonded 2x1 GbE Adapters for Guest VM Traffic using active-backup
  • C. Bonded 2 x 1 GbE Adapters with LACP Enabled for Storage Traffic and Bonded 2 x 40 GbE Adapters for Guest VM Traffic using balance-tcp
  • D. Bonded 2 x 40GbE Adapters with LACP Enabled for Storage Traffic and Guest Traffic using balance-tcp

Answer: D

Explanation:
To satisfy the customer's requirements for maximum uptime and throughput in an AHV cluster deployment with link aggregation at the Top-of-Rack (TOR) switches, the consultant should:
* Bonded 2 x 40GbE Adapters with LACP Enabled for Storage Traffic and Guest Traffic using balance-tcp: This configuration leverages Link Aggregation Control Protocol (LACP) to combine the bandwidth of the two 40GbE adapters, enhancing both redundancy and throughput. The balance-tcp mode ensures effective load balancing of traffic based on TCP session ensuring optimal use of available bandwidth and improved fault tolerance.
References:
* Nutanix Bible (https://www.nutanixbible.com), particularly the sections discussing network configurations and LACP.
* Nutanix University: NCS-Core 6.8 Training (https://university.nutanix.com), which covers advanced network settings for performance optimization.


NEW QUESTION # 102
A Nutanix cluster is deployed with the following configuration:
* Three four-nodeblocks (A, B, and C)
* All Flash Redundancy Factor 2
What is the effect of simultaneous disk failures on two nodes located in block A?

  • A. VM read and write operations continue normally.
  • B. VMs are migrated off of the nodes with disk failures.
  • C. VMs on the nodes with failed disks are unable to write data
  • D. Each node with a failed disk is marked as degraded.

Answer: A

Explanation:
Explanation
Ref:https://next.nutanix.com/how-it-works-22/redundancy-factor-vs-replication-factor-37486


NEW QUESTION # 103
An administrator configures authentication in Prism Central (PC) for the NTNX-Admins group. Users report that they are unable to log in. The administrator confirms that the Active Directory (AD) settings in PC are correct.
Which condition could result in this behavior?

  • A. The users must be added to the Domain Admins AD group.
  • B. A client chap certificate must also be added in PC.
  • C. The Local authentication type must also be selected in PC.
  • D. A role mapping needs to be associated with the AD group.

Answer: A

Explanation:
Ref: https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul- security-role-permissions-pc-t.html


NEW QUESTION # 104
A consultant is onsite with a customer to expand an existing eight-node cluster with four new GPU nodes.
The consultant plugs the nodes into the network switch and follows the procedure to expand the cluster in Prism Element, but the new nodes cannot be found.
Which issue is preventing the new nodes from being discovered?

  • A. IPv6 is disabled on the ToR switch.
  • B. IPMI is not plugged into the network.
  • C. Node discovery is disabled in the BIOS.
  • D. Active Directory is not configured appropriately.

Answer: B

Explanation:
If new GPU nodes cannot be found during an attempt to expand an existing cluster:
* A. IPMI is not plugged into the network: IPMI must be connected and functional for node discovery and management during expansion processes. If IPMI ports are not connected to the network, the nodes will not be discoverable in Prism Element.
References:
* Nutanix Bible (https://www.nutanixbible.com), particularly the sections discussing network requirements for cluster expansion.
* Nutanix University: NCS-Core 6.8 Training (https://university.nutanix.com), focusing on troubleshooting and resolving issues during hardware expansions.


NEW QUESTION # 105
......

Actually our NCS-Core study materials cover all those traits and they are your prerequisites for successful future. Providing various and efficient NCS-Core exam preparation with reasonable prices and discounts, satisfy your need with considerate after-sales services and we give back all your refund entirely once you fail the NCS-Core test unluckily. All those features roll into one. They can greatly solve your problem-solving abilities.

New NCS-Core Test Objectives: https://www.torrentvce.com/NCS-Core-valid-vce-collection.html

BONUS!!! Download part of TorrentVCE NCS-Core dumps for free: https://drive.google.com/open?id=1YW7TtUZ0PUqdDZltb0zWX3D7QKx7laLQ

Report this page